Subject : X-citing
Date : Jan 2001
Source : DHV
Deutscher Hängegleiterverband e.V.
(German Hanggliding and Paragliding Association)
Miesbacher Straße 2
D-83703 Gmund
Phone: +49/(0) 802.296.750
Fax: +49/(0) 802.296.7599
dhv@dhv.de
----------------------------------------------------------------------------------
- Informations under author responsability.
- Informations sous la responsabilité de leurs auteurs.
----------------------------------------------------------------------------------
Paraglider harness
X-citing
DHV GS-03-0191-98
At one paraglider harness X-citing, MZL GS-03-191-98 of
High Adventure an incorrect, sharp edged belt buckle has damaged the belt ribbon.
The consequence from this is in the most unfavorable case the cut of the belt
ribbon and loss of strenght of the harness-construction.
These belt buckles, which have been used only in the first series have no
engraving or stamping of an belt buckle manufacturer (see figures).
In agreement with the manufacturer
High Adventure
Stanserstr. 107 a
CH-6064 Kerns
the DHV has decided on the following precautionary safety measures:
At all paraglider harnesses X-citing,
MZL GS-03-191-98 of High Adventure, the belt buckles must be checked.
Incorrect belt buckles must be maintained by the manufacturer instructions
or exchanged This airworthiness instruction comes into force when it is
published in the News for Paragliders and Hang Gliders (NfGH).
The precautionary safety measure must be carried out before the equipment
is flown again.
The Check and maintenance or the exchange has to be done by the manufacturer
of the Paraglider harness or the german Distributer
Charly Produkte
Am Osterösch 3
D- 87637 Seeg.
Gmund, 29. January 2001
Klaus Tänzler
Managing Director
----------------------------------------------------------------------------------
- Informations under author responsability.
- Informations sous la responsabilité de leurs auteurs.
----------------------------------------------------------------------------------